100% Synthetic Motor Oil

SynLube™ Lube-4-Life^® Motor Oil is 100% Synthetic Motor Oil that does not use any Petroleum Base Stock, not even as a Carrier Oil for the Additives.
Sub-micronic colloidal particles provide the unique performance and longevity.
It is the FIRST and still the ONLY Synthetic Motor Oil that does not need to be changed for up to 15 years or 150,000 miles in most vehicle applications.
However, you can change it as often as you like and return the USED Motor Oil to SynLube Incorporated for 100% Credit or Refund for the Volume Returned; No Time Limit, No Mileage Limit, No Excuses !
That's what makes SynLube™ Lube-4-Life^® Synthetic Motor Oil completely different and unique.

SynLube™ Lube-4-Life^®

Synthetic Motor Oil

PERMANENTLY REPLACES
Conventional Motor Oil - in ALL applications !

Product Uses

SynLube™ Lube-4-Life^® ...for Engines
Is Fully Synthetic Motor Oil, intended for use in all Automotive, Industrial, Marine, Aviation and Agricultural applications where the use of Petroleum or Synthetic Motor Oil is recommended by the OEM (Original Equipment Manufacturer).

SynLube™ Lube-4-Life^® ...for Engines
Synthetic Motor Oil can be used in all climatic conditions during all seasons because of its multi-viscosity SAE 5W-50 rating and an UHVI ( Ultra High Viscosity Index) of VI=200.

SynLube™ Lube-4-Life^® ...for Engines
Synthetic Motor Oil is a truly universal lubricant because it can be used in all Gasoline, Diesel, LPG or CNG fueled engines that are normally aspirated, turbo-charged or super-charged.

SynLube™ Lube-4-Life^® ...for Engines
Is 100% Synthetic Motor Oil engineered to permanently replace conventional Petroleum Motor Oil in most severe operating conditions in high performance diesel and gasoline engines in highway, off-highway, farm fleets, inboard marine and piston engine aircraft applications.

SynLube™ Lube-4-Life^® ...for Engines
Synthetic Motor Oil can be used in all applications where the use of any of the following SAE Viscosity rating is recommended by OEM:
SAE 30, SAE 40, SAE 50, SAE 5W-20, SAE 5W-30, SAE 10W-30, SAE 10W-40, SAE 15W-40, SAE 10W-50, SAE 15W-50, SAE 20W-50 or SAE 5W-50

SynLube™ Lube-4-Life^® ...for Engines
is NOT designed to be used in following applications:

DO NOT USE in two stroke engines where oil is mixed with gasoline
DO NOT USE in Mazda Rotary Engines
NOT certified by FAA for use in radial aviation engines

Key Benefits

Eliminates frequent Motor Oil Changes
- Saves TIME
Reduces Friction
- Lower Fuel Consumption
- More Power
- Cooler Running Engine
Reduces Wear
- Longer Engine Service Life
Protects Environment
- NO Used Oil is generated
- Eliminates disposal of Hazardous Used Oil
- Saves EARTH
Inexpensive to use
- Costs less than a penny per mile to use
- Saves MONEY

Additional Benefits

Provides "dry" lubrication during cold or hot engine starting
Allows engine cranking at -50°F(-45°C)
Compatible with low and ultra low emission engine technology
Does not affect catalytic converter efficiency
Excellent long term engine wear protection
Outstanding soot thickening control
Low Base Fluid volatility reduces oil consumption and emissions
Extra protection for Turbocharger bearings
Outstanding TBN quality reserve
Stable UHVI (Ultra High Viscosity Index) of up to VI=200
Extended drain or NO drain capability
Freedom from Used Oil Disposal
Reduces bore polishing and eliminates engine piston scuffing
up to 8% fuel savings
Sub-zero and extreme high temperature service
Compatible with both conventional Petroleum and Synthetic Motor Oils
No special engine flushing is required when converting from any other Motor Oil in any Engine that does not have excessive deposits or pre-existing "sludge" or "gel" problem.

Product Description

SynLube™ Lube-4-Life^® is synergetic blend of man-made liquid and solid chemically inert lubricants that are thermally stable from -65°F (-54°C) to over 500°F (260°C). The sub-micronic particles of Graphite, PTFE and MoS₂ are colloidally suspended in a mixture of synthetic liquid lubricants.

SynLube™ Lube-4-Life^® is a 100% fully synthetic , multi-grade, super premium, colloidal Sol lubricant.

SynLube™ Lube-4-Life^® does not oxidize nor decompose like conventional Petroleum or Synthetic Motor Oils. It can be therefore used, without oil changes, for up to:

15 Years
150,000 Miles
3,000 Hours of Engine operation in Gasoline Engines
2,000 Hours of Engine operation in Diesel Engines

SynLube™ Lube-4-Life^® ...for Engines
Synthetic Motor Oil is backed up, if installed in NEW vehicles, by our exclusive Limited Lubrication Performance Warranty for up to:

15 Years or 150,000 Miles (15 years or 240,000 Kilometers)

See: Warranty in Services section for details.

Product Performance

SynLube™ Lube-4-Life^® Synthetic Motor Oil exceeds all of the following performance requirements:

API Service SJ Warranty Requirements for new 1997 Model Cars, Vans & Trucks
API Service SL Warranty Requirements for new 2001 Model Cars, Vans & Trucks
API Service SM Warranty Requirements for new 2005 Model Cars, Vans & Trucks
API Service SN Warranty Requirements for new 2011 Model Cars, Vans & Trucks
API Service SP Warranty Requirements for new 2020 Model Cars, Vans & Trucks
GM Service dexos-1 Warranty Requirements for new 2011 GM vehicles Model Cars, Vans & Trucks
GM Service dexos-1 Gen 2 Warranty Requirements for new 2018 GM vehicles Model Cars, Vans & Trucks
API Service CG-4, CF-2, CF-4, CF Warranty Requirements for Heavy Duty Diesel Engines
API Service CH-4 Warranty Requirements for new 1998 Low Emission Heavy Duty Diesels
API Service CI-4 Warranty Requirements for new 2002 Low Emission Heavy Duty Diesels with EGR.
API Service CJ-4 Warranty Requirements for new 2007 Low Emission Heavy Duty Diesels using fuel with 15 PPM Sulfur.
DHD-1 performance specification for Heavy Duty Diesel Service according to International specifications
Cummins performance specification 20076 (also called CH-4 plus or CH-4+)
Mack EO-M, EO-M PLUS, EO-L, EO-L PLUS & EO-K/2 Performance Specifications
Quadruple Cummins NTC-400 performance
Caterpillar 10 TBN requirements
Detroit Diesel 7SE 270
Exceeds the requirements of MIL-L-22851C (U.S. Military)
ACEA ES-99 European Specifications for Heavy Duty Diesel Engine Oil
ACEA B4-98 European Specifications for Light Duty High Speed Diesel Engine Oil
ACEA A3-98 European Specification for Gasoline Engine Oil
CCMC PD-2 for High Performance Automotive Diesel Engines
CCMC G-5 & D-5
ILSAC GF-1, GF-2, GF-3, GF-4, GF-5 & GF-6A

Product Application

INITIAL FILL

SynLube Lube‑4‑Life INITIAL FILL Motor Oil (All Fuels)

SynLube™ Lube-4-Life^® ...for Engines INITIAL FILL is Fully Synthetic Motor Oil designed to be installed ONLY after Conventional Petroleum Motor Oil has been completely drained out and the Oil Filter has been replaced with MicroGlass Motor Oil Filter.

INITIAL FILL formula is used only the first time the product is installed.

Use as much INITIAL FILL formula as is required to completely fill the crankcase.

Verify the proper Motor Oil Level by checking the Engine's Oil Dipstick for indication of FULL

Two Versions of INITIAL FILL Synthetic Motor Oil are available and are fuel specific:

SAE 5W-50 rating allows for All-Season & All-Climate universal use in all Spark Ignition engines regardless of fuel that is used.
(Gasoline, E85, Gasohol, LPG, CNG, Propane or Hydrogen)
- ISO 100 Viscosity rating for industrial applications
SAE 5W-50 rating allows for All-Season & All-Climate universal use in all Diesel fueled Compression Ignition engines
(#2 Diesel, B2 to B80 Bio-Diesel)
- ISO 68 Viscosity rating for industrial applications

ADD OIL

SynLube Lube‑4‑Life ADD OIL Motor Oil

SynLube™ Lube-4-Life^® ...for Engines ADD OIL is Fully Synthetic Motor Oil designed to be installed ONLY after Engine has been operated for some time (several thousand miles) and additional lubricant is required due to NORMAL oil consumption.

ADD OIL is designed to be used ONLY as "make-up" or "Add Oil" it is NOT intended to be used for conventional lubricant applications!

Two Versions of ADD OIL Synthetic Motor Oil available and are fuel specific:

SAE 5W-50 rating allows for All-Season & All-Climate universal use in all engines regardless of fuel that is used.
(Gasoline, E85, Gasohol, Diesel, LPG, CNG, Propane or Hydrogen)
SAE 5W-50 rating allows for All-Season & All-Climate universal use in all Diesel fueled Compression Ignition engines.
(#2 Diesel, B2 to B80 Bio-Diesel)

SERVICE FILL

SynLube Lube‑4‑Life® SERVICE FILL Motor Oil

SynLube™ Lube-4-Life^® ...for Engines SERVICE FILL is 100% Synthetic Motor Oil designed to be installed ONLY after periodic replacement of MicroGlass Motor Oil Filter.

It is Fully Synthetic Motor Oil, which is to be used ONLY in Gasoline fueled engines with very low oil consumption.
(Typically less than quart of ADD oil in 20,000 miles)

UNIVERSAL

SynLube™ Lube-4-Life^® ...for Engines UNIVERSAL is Synthetic Motor Oil, which is designed to be used for both;
the INITIAL FILL and as an ADD OIL.

UNIVERSAL formula Fully Synthetic Motor Oil is less expensive and offers slightly improved fuel consumption over the "Original Formula" consisting of the two component combination of INITIAL FILL & ADD OIL, however the Engine wear protection is slightly reduced and the lubricant service life is limited to lesser of:

5 Years
50,000 Miles
1,000 Hours of Engine operation

FLUSH OIL

SynLube™ Lube-4-Life^® ...for Engines FLUSH OIL is 100% Synthetic Motor Oil, designed to be installed in Engines which have been operated for long time on conventional Motor Oil
(60,000 miles or more).

FLUSH OIL formula Synthetic Motor Oil has been designed to remove sludge, gum and varnish deposits caused by long-term operation on conventional Petroleum Motor Oil

FLUSH OIL should be used with NEW OIL FILTER and Filter Magnet for about 100 miles or at minimum for TWO complete warm-up cycles, where engine achieves NORMAL operating temperature.

FLUSH OIL should be used prior the permanent installation of SynLube™ Lube-4-Life^® ...for Engines INITIAL FILL.

Health and Safety

Based on available toxicological information, this Synthetic Motor Oil produces no adverse effects on health when properly handled and used. No special precautions are suggested beyond attention to good personal hygiene, including laundering oil-soaked clothing and washing skin-contact areas with soap and water. Also eye protection with suitable protective eyewear is suggested during handling and installation. In case of eye contact flush with plenty of water.

Packaging

SynLube™ Lube-4-Life^® SYNTHETIC MOTOR OILS are available in:

One Liter [1.05 US Quart] (33.8 Oz.) plastic bottle
Four Liter [4.22 US Quart] (135.2 Oz.) (1.05 US Gallon) plastic jug

Availability

In stock! - Available for immediate shipment.

Pricing**

Description	SAE Viscosity	API Rating	ILSAC Rating	SKU #	Packaging	Price* US $	Availability
INITIAL FILL (ANY Fuel)	5W-50	SN, SP	GF-6A	0-91275-05500	1 Liter bottle	$32.00	In stock!
INITIAL FILL (Diesel Fuel)	5W-50	CJ-4 CK-4		0-91275-05502	1 Liter bottle	$26.00	In stock!
INITIAL FILL (Diesel Fuel)	5W-50	CJ-4 CK-4		0-91275-05504	4 Liter Jug	$100.00	In stock!
ADD OIL (Any Fuel)	5W-50	SN, SP	GF-6A	0-91275-05501	1 Liter bottle	$20.00	In stock!
ADD OIL (Diesel Fuel)	5W-50	CJ-4 CK-4		0-91275-05503	1 Liter bottle	$22.00	In stock!
SERVICE FILL	5W-50	SN, SP	GF-6A	0-91275-00500	1 Liter bottle	$40.00	In stock!
UNIVERSAL	5W-50	SM	GF-5	0-91275-05505	1 Liter bottle	$25.00	In stock!
UNIVERSAL (Gasoline Fuel ONLY)	0W-20	SN	GF-6A	0-91275-00200	1 Liter bottle	$30.00	In stock!
UNIVERSAL (Gasoline Fuel ONLY)	5W-40	SN	GF-6A	0-91275-05400	1 Liter bottle	$25.00	In stock!
FLUSH OIL	5W-40	SN	GF-6A	0-91275-05402	1 Liter bottle	$10.00	In stock!