Synthetic Motor Oil - FLUSH OIL

SynLube™ Lube-4-Life^® FLUSH OIL Motor Oil is 100% Synthetic Motor Oil that does not use any Petroleum Base Stock, not even as a Carrier Oil for the Additives.

It is a specially formulated Synthetic Motor Oil that is intended to clean older engines form sludge deposits, gum and varnish.

SynLube™  Lube-4-Life^®

Synthetic FLUSH OIL Motor Oil

 

---

Product Description

SynLube™ Lube-4-Life^® is synergetic blend of man-made liquid and solid chemically inert lubricants that are thermally stable from -65°F (-54°C) to over 500°F (260°C).

SynLube™ Lube-4-Life^® is a 100% fully synthetic , multi-grade, super premium lubricant.

---

Product Performance

SynLube™  Lube-4-Life^® Synthetic Motor Oil exceeds all of the following performance requirements:

• API Service SJ Warranty Requirements for new 1997 Model Cars, Vans & Trucks
• API Service SL Warranty Requirements for new 2001 Model Cars, Vans & Trucks
• API Service SM Warranty Requirements for new 2005 Model Cars, Vans & Trucks
• API Service SN Warranty Requirements for new 2011 Model Cars, Vans & Trucks
• GM Service dexos-1 Warranty Requirements for new 2011 GM vehicles Model Cars, Vans & Trucks
• API Service CG-4, CF-2, CF-4, CF Warranty Requirements for Heavy Duty Diesel Engines
• API Service CH-4 Warranty Requirements for new 1998 Low Emission Heavy Duty Diesels
• API Service CI-4 Warranty Requirements for new 2002 Low Emission Heavy Duty Diesels with EGR.
• API Service CJ-4 Warranty Requirements for new 2007 Low Emission Heavy Duty Diesels using fuel with 15 PPM Sulfur.
• DHD-1 performance specification for Heavy Duty Diesel Service according to International specifications
• Cummins performance specification 20076 (also called CH-4 plus or CH-4+)
• Mack EO-M, EO-M PLUS, EO-L, EO-L PLUS & EO-K/2 Performance Specifications
• Quadruple Cummins NTC-400 performance
• Caterpillar 10 TBN requirements
• Detroit Diesel 7SE 270
• Exceeds the requirements of MIL-L-22851C (U.S. Military)
• ACEA ES-99 European Specifications for Heavy Duty Diesel Engine Oil
• ACEA B4-98 European Specifications for Light Duty High Speed Diesel Engine Oil
• ACEA A3-98 European Specification for Gasoline Engine Oil
• CCMC PD-2 for High Performance Automotive Diesel Engines
• CCMC G-5 & D-5
• ILSAC GF-1, GF-2, GF-3, GF-4 & GF-5

---

Product Application

FLUSH OIL

SynLube™  Lube-4-Life^® ...for Engines FLUSH OIL is 100% Synthetic Motor Oil, designed to be installed in Engines which have been operated for long time on conventional Motor Oil
(60,000 miles or more).

FLUSH OIL formula Synthetic Motor Oil has been designed to remove sludge, gum and varnish deposits caused by long-term operation on conventional Petroleum Motor Oil

FLUSH OIL should be used with NEW OIL FILTER and Filter Magnet for about 100 miles or at minimum for TWO complete warm-up cycles, where engine achieves NORMAL operating temperature.

FLUSH OIL should be used prior the permanent installation of SynLube™  Lube-4-Life^® ...for Engines INITIAL FILL.

---

Health and Safety

Based on available toxicological information, this Synthetic Motor Oil produces no adverse effects on health when properly handled and used. No special precautions are suggested beyond attention to good personal hygiene, including laundering oil-soaked clothing and washing skin-contact areas with soap and water. Also eye protection with suitable protective eyewear is suggested during handling and installation. In case of eye contact flush with plenty of water.

---

Packaging

SynLube™  Lube-4-Life^® FLUSH OIL MOTOR OIL is available in:

• One Liter [1.05 US Quart] (33.8 Oz.) plastic bottle

---

Availability

In stock! - Available for immediate shipment.

---

Pricing**